Filter
Top Products
17
This section describes the features and operations
of the Harman Verti-Flow™ Stoker Control. The timers are
adjustable from 0 minutes to 15 minutes in 1 minute steps.
There are red lights on the front panel to show proper op-
eration of the timer. One indicator shows power is applied
to the unit. The other three indicators show when power is
available at the adjacent receptacle.
The stoker control will be mounted on the side panel
of the feeder directly below the coal hopper. The three re-
ceptacles and switch will be facing forward while the power
cord, 3 AMP fuse access port and the thermostat connections
will be to the rear.
Verti-Flow™ Stoker Control
MAX LOAD MAX LOAD MAX LOAD
0.5 A 0.75 A 1.25 A
VERTI - FLOW ™
STOKER CONTROL
COMPONENT RECEPTACLES - ON SIDE