Filter
Top Products
Concord 4 Series Security Systems 31
• EXIT— press once to use the Quick Exit feature.
• AWAY—press once to arm to Level 3—AWAY.
Note
Macro Keys should not be
programmed to disarm the
system.
Your installer can also program these buttons to perform a system command different from those
described. For example, instead of entering the command 2 + CODE + 4 + 6 (arm to STAY with
No Delay and Latchkey), your installer can program one of the macro keys to perform the task
with just one press. Check with your installer for more information.
System
Information
There is information about your system that is useful to know. This includes the factory code, the
system number, the system level, and software version.
After identifying the information for your system, make a note of it in the “Appendix A: User
Sheets”.
To identify system information:
1. Enter the programming menus by pressing 9 + System or Partition Master CODE.
2. Press
010.
The first information displayed is the factory code. For example, “F nnn – nnnn,” or “FAC-
TORY CODE nnn * nnnn.”
Press
B to display the system number. For example, “N – nnnnnnn,” or “SYSTEM NUM-
BER nnnnnnn.”
Press
B to display the system level. For example, “L nnnn,” or “SYSTEM LEVEL nnnn.”
Press
B to display the software version. For example, “P nnnn,” or “SW VERSION nnnnx.”
3. Press
* + 00 + # to exit the programming menus.
Viewing the
Event Buffer
You have the option to view the event history for each partition of your system. These events
include arming, disarming, tampers, programming entries, just to name a few.
Overview
Note
Fixed Display Touchpads
cannot be used to view the
event history.
• The System Master Code can view all events from any partition. The partition masters can
only view global system events and events related to their respective partition. Regular user
codes cannot view event history.
• All partitions can view event history simultaneously, but only one touchpad at a time can
view the history in each partition. While the event history is being viewed, all other control-
ling sources are disabled (except for panic alarm buttons) and non-viewing touchpads display
“VIEWING EVENT BUFFER”.
To view event history:
1. The current partition must be armed to level 1 or 2.
2. At an alphanumeric touchpad, press 8 + System or Partition Master CODE + 8.
• The touchpad displays “VIEWING EVENT BUFFER” followed by the event description,
date/time or details (user, source, zone, etc).
• The most recent event appears first.
• Scroll through the events by pressing the A (back) and B (forward) keys.
• The C key is used to toggle the second line display between Date/Time and Details.
• Press the * key to exit Viewing Event History.