Stovax PR0731 Electric Heater User Manual


  Open as PDF
of 26
 
15
INSTALLATION INSTRUCTIONS
COMMISSIONING
Each of the four switches can be set to either one of two
positions, in any combination.
Tore-codethehandset:
• ChangethecombinationofhowtheDIPswitchesareset,
Diagram 12
12
AR1936
Once the handset has a new code the control box needs to
be reprogrammed:
To access the control box see Servicing Instructions, Section
11 - Control Box.
• Pressandholdtheresetbuttononthecontrolboxuntil
you hear two signals. After the second longer signal:
• Releasetheresetbuttonandwithin20
secondspresstheDOWNbuttononthe
handset until you hear an additional long signal
confirming the new code
5. COMMISSIONING
5.1 Complete the Commissioning Checklist at the front of this
manual covering:
• Fluechecks
• Gaschecks
5.2 In the unlikely event that the appliance is receiving
interferecefromotherelectronicdevices,re-programmethe
handset/Control box
 previous next