Filter
Top Products
www.fmiproducts.com
125160-01A32
OPERATION AND MAINTENANCE GUIDLINES
Continued
ashing and weather seals that surround it. If you
nd any cracks or openings around screws or nails,
seal them to avoid any roof or chimney chase leaks.
SURFACE CRACKS
The Grand Meridian replaces are manufactured us-
ing high quality materials. During the drying process,
surface cracking may occur. These small cracks (un-
der 1/16” will not effect the replace safety or per-
formance). During the assembly process, ll surface
cracks with thin-set mortar and brush when drying for
a smooth surface nish.
TECHNICAL SERVICE
You may have further questions about installation, op-
eration, or troubleshooting. If so, contact FMI PROD-
UCTS, LLC at 1-866-328-4537.
When calling please have your model and serial num-
bers of your replace ready.
You can also visit our web site at
www.fmiproducts.com.
REPLACEMENT PARTS
If this product is missing a part or has a broken com-
ponent, please do not return it to the store. Call FMI
PRODUCTS, LLC at 1-866-328-4537 to answer
questions and replace parts under warranty.
Note: Use only original replacement parts. This will
protect your warranty coverage for parts replaced
under warranty.
When calling, have ready:
• your name
• your address
• model and serial numbers of your replace
• how replace was malfunctioning
• purchase date
Removal of Creosote and Soot Formation – Creo-
sote vapors are known to form in the relatively cool
chimney ues of slow burning res, hence, creosote
residue collects on the ue lining. Because of soot
and creosote build-up, it is recommended that the
replace and chimney cleaning be done twice a year.
In colder climates, cleaning should be done more of-
ten.
Always allow the replace to completely cool before
you work on it, which means, of course, shutting off
all gas and electrical connections, also.
Be certain that you use only solid fuel in your re-
place. You may use a natural or LP gas log lighter as
a method to start your wood re.
The ue damper must be in the OPEN position when-
ever there is heat in the replace.