Filter
Top Products
- 20 -
Miscellaneous Commands (cont)
TO VIEW AUTOARM TIME
To view the autoarm time for the partition to which the keypad is assigned,
press: # [52] [user code with authority level 1 or 2].
AUTOARM TIME:
05:00PM
(The user code is not required if so programmed by installer.)
DOOR STRIKE
To activate door strikes:
Press # , then [57], then [Door #]
If programmed, certain user codes can also be used to open a door. See
your installer for door numbers.
VIEW TIME
To view the system time, press: # [51]. A typical display is as follows:
Dec 27, 1999
08:15A
SET TIME
To set the time, press: # [3] [user code*], then follow the prompts and
enter the hour, minute, month, day, and year. All entries are 2-digit
entries.
(*The user code is not required if so programmed by installer.)
DISPLAY ZONE DIRECTORY
To view a list of the zones in the current partition, press # [4]. The
zones will automatically scroll.