Filter
Top Products
- 19 -
Miscellaneous Commands (cont)
QUICK EXIT
Restarts exit delay time if the system is already armed. This allows
someone to leave after the system has been armed, without having to
disarm the system first. To restart the exit delay time, press: STAY ..
TURN CHIME ON/OFF
Chime is an optional feature that causes the keypad to beep when selected
doors are opened while the burglary protection is off or disarmed.
Only your installer can program a zone for the Chime feature, but once
programmed, you can turn Chime on or off to meet your daily needs.
To turn Chime on or off: Press # ., then [6].
ASSIGN USERS ACCESS TO OTHER PARTITIONS
You can assign users access to any of the partitions in a multi-partition
system by doing the following:
# . [7] [master code] [user number] [1, 2, 3]
where 1, 2, 3 are the partitions to which the user is authorized to access.
CHANGE PARTITION
To arm or disarm other partitions from your keypad, do the following:
# [0] [1-3, 0, 9]
where: 1-3* = the desired partition you wish to change to
0 = arms all partitions
9 = disarms all partitions
*When you enter a partition number (1-3), the system displays the current
armed state for that partition. You can then arm or disarm by entering the
arming/disarming command.
SET AUTO ON TIME
Set Auto On Time lets you set the time your system will automatically turn
on.
To set the Auto On Time: Press # , then [54] [code] [hour 00-23] [minute 00-
59].
The keypad will prompt you for the required entries.