Filter
Top Products
- 17 -
Miscellaneous Commands
SEND HELP ALERTS
Your system can be programmed for 3 separate keypad Send Help alerts
that would send an emergency signal to your central station. See the
System Reference sheet to see which have been programmed for your
system.
DURESS
Your system can be programmed to send an emergency signal to the
central station if you are forced to enter the premises under threat. If you
choose to include this feature, assign codes to users 60-64, which are
dedicated to this function, if programmed. Use these codes only under a
duress circumstance.
QUICK ON (QUICK ARMING)
If programmed by your installer, Quick On, or Quick Arming, allows you to
turn the system on to the AWAY mode without entering a user code.
Press # ., then [1].
NOTE: Turning your system Off always requires a valid user code.
QUICK FORCED ON
If programmed by your installer, Quick Forced On allows you to turn the
system on to the AWAY mode by automatically bypassing all zones that are
not ready.
Press # ., then [2].
NOTE: A valid user code is still required to turn the system off.
NOTE: This feature is disabled on UL installations.
QUICK BYPASS
If you have Quick Bypass programmed for your system, you can bypass
zones without entering your user code. The Quick Bypass procedure is:
BYPASS 2-digit Zone no. (e.g. 01 for zone 1)
NOTE: Bypassed zones are not protected when the system is turned on.
After the bypass command has been accepted, the keypad sounds one long
beep. The, or the display will show:
LCD Keypad:
BYPASSED: ZN1
PART 1
Fixed-Glass Keypad:
Bypass LED lit
LED Keypad:
Zone light of the
bypassed zone(s) will
slowly blink