EverFocus EDSR 900F Boiler User Manual


 
EVERFOCUS ELECTRONICS CORPORATION
Chapter
8
How to Upgrade Firmware on the
DVR?
This chapter will try to give you a detailed instruction on how to upgrade
the DVR. This will be a helpful in completing the upgrading process.
¾ Please go to ftp://208.50.31.200 and go to DVR Firmware
upgrade folder. Then click on the folder that represents you’re DVR’s
model number.
¾ Copy the .HEX to CF card using the Compact Flash reader that came
with your DVR (from a computer).
¾ Please Note: Lexar Compact Flash Cards are not compatible with Everfocus
digital recorders. Everfocus suggests using
Sandisk or Kingston Compact
Flash Cards.
¾ Insert the
Sandisk or Kingston Compact Flash Cards into the Compact
Flash card slot on the front panel of the DVR. When inserting the Compact
Flash card, make sure the direction of insertion is correct.
¾ DVR must be off of the record mode.
¾ If the menu pops up when you press the stop button. This usually means
you have either the DVR is in Timer record or Motion record. Log into the
DVR menu by pressing the Menu button. Go to Either Timer Setting Menu
or Motion Record Setting menu and turn all operations off. Then go to
record setting menu and turn all Operations off and exit from the menu
page.
¾ Once you have stopped any type of recording on the DVR you are ready to
upgrade.
¾ Press the menu button and use the Jog Dial to go to System menu (See
page 41).
58