EVERFOCUS ELECTRONICS CORPORATION
To Load the defaults simply use the arrow buttons to change this option to
yes. This will bring up a second dialog which asks you if you want to do a
load defaults again. To change this, simply use the Jog Dial on the DVR.
Press the Enter key to make your selection.
Please Note: See Load Defaults Chapter for more details and
diagrams. Also after the system has loaded the defaults successfully, be
sure to cycle the power to the digital recorder by turning the power off
and then back on.
¾ CF Format: When using a Compact Flash card, the card needs to be
formatted to FAT 32 before it can be used on the unit. The DVR gives
you this option in the event that if you do not have a PC handy to format
the CF card
43