Filter
Top Products
EVERFOCUS ELECTRONICS CORPORATION
Diagram 25
¾ To stop recording simply press the Stop button.
Please Note: When the Hard Drive is full, the DVR will either stop
recording automatically or overwrite from the beginning of the hard drive.
This is all dependent on what was set in the record setting (see page 25).
Timer Recording Setup
¾ Assuming you have completed the setup options in Chapter 1 and 2. Log into
the DVR menu by pressing the Menu button.
¾ Once You Reach the Record Setting Menu (See Page 25) change the
Recording speed and quality that best fits your application. Also turn OFF
Alarm OP, pre alarm and permanent recording options.
Turning the jog dial clockwise or counter clockwise will allow
you to scroll through the different menu setup option pages.
Please Note: See Appendix B to find the appropriate speed to fit your
recording needs.
¾ Use the jog dial after completing the previous step and go to Timer Record
Setting menu (See Page 14). Setup a timer for your application and exit the
menu by pressing the Menu button. Once you have exited the menu the DVR
will go into record mode.
¾ To view the operating display (diagram 26), press the Display button.
45