Enviro 1200 Fireplace Insert Stove User Manual


 
31
Installation
MODEL 1700 BRICK PLACEMENT:
COMPLETE THE STOVE AND SMOKE PIPE INSTALLATION BEFORE PLACING THESE BRICKS.
1. Place the four (4) full size bricks along each side of the rebox and one (1) full size brick on either
side of the back of the rebox.
2. To place the oor bricks, lay the two (2) partial bricks along the back of the oor. Then on the left, lay
three (3) full size bricks and on the right, lay two (2) full size bricks in the center and the half brick in
the front (for the ash dump). The spaces between the bricks will soon ll with ashes.
When replacing bricks, use only pumas type re bricks.
TOTAL BRICKS:
15 - Full size bricks 9” long x 4.5” wide x 1.25” thick
(22.9 cm long x 11.4 cm wide x 3.2 cm thick)
2 - Partial bricks 9” long x 3” wide x 1.25” thick
(22.9 cm long x 7.6 cm wide 3.2 cm thick)
1 - Half brick 4.5 “ long x 4.5” wide x 1.25” thick
(11.43 cm long x 11.43 cm wide x 3.175 cm thick)

Figure 35: Brick Placement for 1700 shown with Secondary Air Channel and Tubes.