Filter
Top Products
22618-17-0308Page 16
ROUGH FRAMING DIMENSIONS
INSERT INTO MASONRY FIREPLACE
A - 13 /34” MIN. CO-LINEAR
8 1/2” WHEN USING DIRECT VENTING
PVVK-24H/PVVK-48H
NOTE: DIMENSIONS FOR USE WITH SHORT TOP
PV4H. THIS IS RECOMMENDED FOR UNIT
SERVICEABILITY.
B - 25 1/8”
C - 28”
NOTE: IF TRIM AROUND HEATER IS NECESSARY,
THE SURROUND KIT PVE-1 MUST BE USED,
AND SUBTRACT 1” FROM (A) DIMENSION.
A - 12 3/4” MIN. SHORT TOP PV4H
17 13/16” MIN. SLIM TOP PV2H
USING PVE-1 SURROUND KIT
B - 25 1/8” MIN. DIRECT VENT
26 1/2” MIN. SINGLE FLUE
29” MAX
C - 28” MIN. NO SURROUND
33” MIN. WITH PVE-1 SURROUND
35” MAX. WITH PVE-1 SURROUND
Figure 13
Figure 12