Filter
Top Products
Instruction Manual
HAS60E-IM-HW
June 2007
NGA 2000 CLD
P - 5PrefaceEmerson Process Management GmbH & Co.OHG
OVERBALANCE HAZARD
This analyzer module may tip instrument over if it is pulled out too far and the Platform is not
properly supported.
WARNING
POSSIBLE EXPLOSION HAZARD
This equipment is not designed and should not be used in the analysis of flammable samples.
Use of this equipment in this way could result in explosion or death.
WARNING
POSSIBLE EXPLOSION HAZARD
Ensure that all gas connections are made as labeled and described within this manual and leak
free. Improper gas connections may cause explosion, serious injury or death.
WARNING
Tampering with or unauthorized substitution of components may adversely affect the safety of this
instrument. Use only factory documented/approved components for repair.
Because of the danger of introducing additional hazards, do not perform any unauthorized modifi-
cation to this instrument!
CAUTION
HIGH TEMPERATURES !
While working at thermostated components inside the analyzer modules hot components may be
accessible!
CAUTION
Do not interchange gas inlets and outlet! All gases must be conditioned before supplying!
When supplying corrosive gases ensure that gas path components are not affected!
Exhaust lines must be installed in a descending way, need to be pressureless, frost-protected
and in compliance with applicable legislative requirements!
CAUTION