Filter
Top Products
3.9. RECOMMENDED MAINTENANCE SCHEDULE
Use this as a guide under average-use conditions.
Components
Weekly
or after
+/- 500 pounds
Twice a year
or after
+/- 2 tons
Annually
or
per 4 tons of pellets
Burn Pot
Brush / Vacuum
Glass
Clean
Heat Exchanger Tubes
Scrape and
Vacuum*
Exhaust Channels
(through access traps)
Vacuum*
Ash Drawer
Empty / Vacuum
Combustion Chamber
Vacuum
Vacuum / Brush*
Exhaust Blower
Vacuum*
Combustion Blower
Vacuum*
Pressure Switch Tap
Brush*
Venting System
Inspect
Sweep
Gaskets
Inspect
Hopper
Empty / Vacuum
*Cleaning frequency may vary depending on the type of fuel used. Fuel with higher ash content will increase
cleaning frequency.