Filter
Top Products
Appendix | 71
Appendix
SSH/Telnet Enable and Disable
1
Reserved Extended Configuration (NetFn: 30H CMD:01H)
2
Set/Get Extended Configuration(NetFn: 30H CMD:03H/02H)
Example:
Get SSH/Telnet enable status:
1
Reserved Extended Configuration
ipmitool raw 0x30 0x01
Response: 0x01 (Reservation ID)
Configuration ID = 04h, Security
Attribute ID Size Description
Service
Disabled
1 1 Disables or enables services. This
attribute takes precedence over the
individual feature enabled/disabled.
Once one service has been disabled, the
BMC must not allow users to enable the
corresponding feature and D5h
completion code must be returned. For
example, if HTTP/HTTPS is disabled,
user must not be able to enable the Web
Server through Web Server
Configuration (Configuration ID 0Ch).
In other words, Web can only be
disabled or enabled when
HTTP/HTTPS is enabled.
[0] - all services except IPMI are
disabled. This bit takes precedence over
other bits. Default is 0.
[1] - KVM/Virtual Storage, enabled by
default.
[2] - HTTP/HTTPS, enabled by default.
[3] - SSH/Telnet, disabled by default.
R/W