Filter
Top Products
IPMI OEM Command List | 63
Configuration
(Configuration ID 0Ch). In
other words, Web can only
be disabled or enabled
when HTTP/HTTPS is
enabled.
[0] - all services except
IPMI are disabled. This bit
takes precedence over other
bits. Default is 0.
[1] - KVM/Virtual Storage,
enabled by default.
[2] - HTTP/HTTPS,
enabled by default.
[3] - SSH/Telnet, disabled
by default.
Max Authentication
Failures
2 1 Specifies the maximum
number of allowed
authentication failures.
Setting this value to 0 will
disable the lockout feature.
Whenever this setting is
modified, the number of
authentication failure of
each enabled user must be
reset to 0.
When an account Is locked
out, the IPMI Messaging
must be disabled on the
LAN channel. See Get User
Access command.
Default = 00h (disable
Lockout feature)
R/W
Lockout Window 3 2 Specifies the window, in
second, during which if the
consecutive maximum
number of authentication
failures is reached, the
account should be disabled.
Setting this value to 0 will
disable the lockout feature.
R/W