Filter
Top Products
IPMI OEM Command List | 70
Configuration ID = 11h, Power Management
Attribute ID Size Description
Power
Management
Enable
1 1 Specify the use of power
management method.
Bit 7: Enable DPNM power
management
1b = enable DPNM
0b = disable DPNM
Bit 6:0: reserved
R/W
Power Staggering
AC Recovery
2 1 This parameter is only
effective if the Power Policy is
not set to always off.
0x00 : Immediate Power On
(No Delay) : Default
0x01 : Auto (Random), the
auto generated delay time must
be in the range of
Minimum
Power On Delay
and
Maximum Power On Delay
.
0x02 : User Defined, the user
defined delay time must be in
the range of
Minimum Power
On Delay
and
Maximum
Power On Delay
.
R/W
Power On Delay 3 2 Defines the time to delay
power on the system after AC
recovered.
R/W
Minimum Power
On Delay
4 2 Specifies the minimum power
on delay time when AC is
restored. This should not be
less than the time BMC startup
time.
R
Maximum Power
On Delay
5 2 Specifies the maximum power
on delay time when AC is
restored. The number must
large than
Minimum Power
On Delay
.
R/W