Filter
Top Products
IPMI 1.5 / 2.0 Command Support List | 50
Table Error! No text of specified style in document.-19. Sensory Device Commands
Command NetFn CMD O/M Supported
Get Device SDR Info
S/E 20h M No
Get Device SDR
S/E 21h M No
Reserve Device SDR Repository S/E 22h M No
Get Sensor Reading Factors S/E 23h M Yes
Set Sensor Hysteresis
S/E 24h M Yes
Get Sensor Hysteresis
S/E 25h M Yes
Set Sensor Threshold
S/E 26h M Yes
Get Sensor Threshold
S/E 27h M Yes
Set Sensor Event Enable S/E 28h M Yes
Get Sensor Event Enable S/E 29h M Yes
Re-arm Sensor Events
S/E 2Ah M No
Get Sensor Event Status S/E 2Bh M No
Get Sensor Reading
S/E 2Ch M Yes
Set Sensor Type
S/E 2Dh M Yes
Get Sensor Type
S/E 2Eh M No
Set Sensor Reading and Event Status S/E 2Fh O No
Set Sensor Reading and Event Status
(
Note:
ONLY FOR FAN DEVICES.)
S/E 30h O Yes
Table Error! No text of specified style in document.-20. LAN Commands
Command NetFn CMD O/M Supported
Set LAN Configuration Parameters
(
Note:
Parameter 9 and 25 are not supported.)
Transport 01h M Yes
Get LAN Configuration Parameters
(
Note:
Parameter 9 and 25 are not supported.)
Transport 02h M Yes
Suspend BMC ARP
Transport 03h O Yes
Get IP/UDP/RMCP Statistics Transport 04h O No