Filter
Top Products
IPMI OEM Command List | 62
or Dual Channel Single Package).
When user attempts to set to a NIC
value that is not supported on the
platform, a completion code CCh
should be returned to indicate an
invalid data.
Configuration ID = 03h, SOL
Attribute ID Size Description
SOL Idle Timeout 1 2 byte1:2 - Define the
inactivity timeout in
minutes, 1-based, LSByte
first. This parameter only
applies to the IPMI over
LAN session with SOL
payload activated.
0h= session does not
timeout and close due to
inactivity.
Default = 01h
R/W
Telnet/SSH
Redirect Enable
2 1 0: Disabled (default)
1: Enabled
R/W
Configuration ID = 04h, Security
Attribute ID Size Description
Service Disabled 1 1 Disable or enable services.
This attribute takes
precedence over the
individual feature
enabled/disabled. Once one
service has been disabled,
the BMC must not allow
user to enable the
corresponding feature and
D5h completion code must
be returned. For example, if
HTTP/HTTPS is disabled,
user must not abe able to
enable the Web Server
through Web Server
R/W