Filter
Top Products
Local Computer Installation
7
The screws should be 3.25'' (82.5 mm)
apart and lined up vertically.
3. Drill the marked locations with a 3/32
'' or
7/64
'' (2.2 to 2.7 mm) drill bit.
4. Drive the two #6 x 1
'' (3.5 mm x 25 mm)
pan head self-threading screws into the
wall.
5. Leave at least a 1/8
'' (3 mm) space
between the wall and the heads of the
screws.
6. Slide the keyholes on the back of the
case over the two screw heads.
Local Computer Installation
The instructions below contain the base procedures for connecting and setting
up a local or remote connection between your Weather Envoy and a computer.
Additional setup not featured in this manual is required for all Weather Envoy,
3.25"
(82.55mm)
Drill 3/32"
or 7/64"
(~2.2 to 2.7mm)
Holes
Template to Scale
#6 X 1"
Pan-Head
Screws