Filter
Top Products
Accessories
Sears offers many useful accessories for your garage door opener. They are illustrated below with
Sears model numbers and descriptions.
139.53703
139.53704
139.53705
53589
Emergency Key Release:
Required for a garage with NO
access door. Enables homeowner
to open garage door manually from
outside by disengaging trolley.
Outdoor Key Switch:
Operates the garage door
automatically from outside when
i remote control is not handy.
8 Foot Rail Extension
Toallowan 8 footdoorto openfu_
10 Foot Rail Extension:
Toallowa 10 footdoorto opanfu_.
Support Brackets:
For finished ceilings or where
additional support is required,
based on garage construction.
Includes brackets and fastening
hardware.
139.53681
139.53680
139.53684
• I
139.53686
139.53709
SECURITY.Ik 3-FuncUon Remote
Control:
Includes visor clip.
SECURITY+ Compact
3-Function Remote Control:
With loop for attaching key ring.
(Available April, 1997)
SECURITY+ Keylees Entry:
Enableshomeownerto operategarage
dooropener from outsidebyenteringa
password.Alsocan add a temporary
passwordfor visitorsor service
persons.This temporary passwordcan
be limitedtoa programmablenumber
ofhoursor entries.
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in
the home with a remote.
Door Clearance Brackets:
(For Sectional Doors Only)
Replaces top brackets and rollerson
door to reduce height of door travel.
For use when installing opener in
garage with low headroom clearance.
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Premium Control Console:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control pushbar.
4. After the opener light flashes, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the password, then press
and hold the Enter button. The indicator light on
the door opener panel will blink.
3. Press and release the SRT (learn) button on the
opener panel. After the opener lightflashes,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.