Open as PDF
Installation Step 3 [
Attach the T-rail to the Header Bracket
• Position the opener on the garage floor below the
header bracket. Use packing material as a
If the door spring is In the way you'll need help.
Have someone hold the opener securely on a
temporary support to allow the T-rail to clear the
• Position the cable pulley bracket against the header
• Align the bracket holes and join with a clevis pin as
• Insert a ring fastener to secure.
5/I 6"x2-3/4 • Cable
Hardware Shown Actual Size
5/16" x 2-3/4"