CFM Corporation A132 Indoor Fireplace User Manual


 
25
Gas Fireplace Insert
10002964
4. Install the trim top deflector and fasten it (will hold
the inner top piece). Use two (2) screws to assemble
them.
5. Install trim channels (left and right sides). Use two
(2) screws to assemble each piece.
6. Slide on the trim top channel and fasten it from the
back side.
7. Remove
ALL plastic protective covering from brass
trim.
FP1262
RHESSD/LD
trim assy
1/03
Trim Top
Channel
Trim
Side
Channel
Trim
Side
Channel
Screw
Trim
Framing Inner Sides
FP1262
Fig. 41 RHESSD and RHESLD trim assembly.
A flat louvre kit OR a bay window kit need
to be chosen to complete the installation.
Frame Mounting
General Information
The Decorative Front Frame should be installed last
after all other work, such as gas connections, vent-
ing, etc., has been completed and thoroughly checked
and tested for operation, leaks and proper installation
requirements.
Fit decorative frame to the fireplace and fasten. (Fig.
42)
Plastic on the trim must be removed be-
fore mounting onto the fireplace.
Glass must be tightly pressed against
the front of the frame in order to prevent
screws from damaging glass edges.
FP1263
frame mounting
1/03
Screws
Front View
FP1263
Fig. 42 Frame mounting.