Filter
Top Products
ZERO CLEARANCE STANDOFF(S) ASSEMBLY
NOTE: All Standoff(s) must be attached to the appliance before installing as a Zero
Clearance appliance.
“Follow the instructions given in the diagrams below exactly”.
1
5
.
0
0
”
12.50” Front Of Top
Trim Panel
Rear Standoff Location: 6.00” down
from the top of the rear of the appli-
ance, and center left to right.
Top Standoff
(2 per unit)
Side Standoff
(2 per unit)
6.00”
5/16” Hex Head
Self Drilling Screws
Top Trim Panel
13.75 MIN.
Page 25