Filter
Top Products
STEP 6: Slide the unit into the front opening of the mantel so the top metal trim panel and
outer sides of the heater meet flush with the surround (mantel) front.
STEP 7: Remove cloth or blanket from underneath stove.
STEP 8: Take the two metal “ell” brackets with the screws provided and anchor the back of
the fireplace to the surround (mantel).
STEP 9: Place top on to the surround, flush with the back and equal on each end. Secure both
ends and middle with screws.
SURROUND (MANTEL) BASE
Page 23