Filter
Top Products
Embroidery 5-39
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
▼
Continuing Embroidery After Turning off the Power
Example: If the power goes off while sewing the second color
1. Select the pattern and press .
2. Press to move the second color to the first position in the
display.
3. Use , , or to advance the pattern to slightly
before where sewing stopped.
4. Lower the presser foot lever and start sewing.
CAUTION
To continue a pattern that has had its position changed (see page
5-26), move the pattern the same amount in the layout display
screen, then follow the steps above. In this case, you need to
make a note of the pattern's position before turning off the
power.
Note
Use the display to remember the last stitch number sewn
before you turn off the power. Then use the , , , or
keys to move the pattern to the same stitch number and con-
tinue sewing.