Filter
Top Products
Setting Up 1-3
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
START
STOP
■ Embroidery Unit Carrying Case
■ Operation Buttons
“Thread Cutter” Button
Press this button after sewing to automatically trim the
excess thread.
CAUTION
Do not repeat thread cutting after the threads are
cut. The thread may tangle or the needle may
break, resulting in damage.
CAUTION
• Do not press the “Thread Cutter” button when there
is no fabric in the machine or during machine opera-
tion. The thread may tangle resulting in damage.
• When cutting thread thicker than #30, nylon thread,
or other specialty threads, use the thread cutter on
the side of the machine.
1
When opening the embroidery unit carrying case, be sure
to unhook the two latches.
When closing the carrying case, press in on the latches
until each one clicks twice to make sure that they are fully
secured.
1 Latches
1 Embroidery unit
2 Embroidery frame (large)
3 Embroidery frame (medium plus)
4 Embroidery frame (medium)
5 Embroidery frame (small)
6 Sheet large
7 Sheet medium plus
8 Sheet medium
9 Sheet small
3 2 789
64 5 1