Filter
Top Products
3-58 Sewing Utility Stitches
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
6
5
1
1
6
5
1
4. Lower the buttonhole lever so that it is positioned be-
hind the metal bracket on the buttonhole foot.
1 Metal bracket
5. Gently hold the end of the upper thread, and then press
the “Start/Stop” button to start the machine. Once sew-
ing is completed, the machine automatically sews re-
inforcement stitches, and then stops.
Note
If automatic thread cutting is turned on before you start
sewing, both threads are automatically cut after the rein-
forcement stitches are sewn. If the fabric does not feed
(for example, because it is too thick), increase the stitch
length setting.
Darning Stitch Cycle
1 Cycle of reinforcement stitches