Filter
Top Products
Sewing Utility Stitches 3-47
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
1
Tape or Elastic Attaching
1. Select a straight stitch pattern, and attach presser foot
“J”.
Set the stitch length to 4.0 mm, and loosen the upper
thread tension to 2.0.
Note
Be sure that neither the automatic reinforcement
nor the automatic thread cutting is selected.
2. Sew 2 rows of straight stitches on the right side of the
fabric, then pull the bobbin thread to gain the neces-
sary gather.
Note
Before sewing the straight stitch, rotate the balance wheel
and pull up the bobbin thread, grasping the top and bob-
bin thread pull a length of thread out from the rear of the
machine. (Be sure that the presser foot is lifted).
3. Place the tape over the gather, and hold it in place
with basting pins.
1 Tape