Filter
Top Products
47
Arranging Embroidery Designs
■ Changing realistic preview
settings
Set the realistic preview settings for the desired
realistic preview display.
1. Click Display, then Realistic Preview
Attribute Setting.
→ A Realistic Preview Attribute dialog box
similar to the ones shown below appears.
2. Use the Thread Width slider to set how wide
the thread will appear.
3. If necessary, use the Contrast slider to set the
contrast.
4. If necessary, use the Brightness slider to set
how bright the display is.
5. Click Apply to display a realistic preview of the
patterns with the new settings (when the
realistic preview is displayed).
Or, click OK to save the settings for the next
time that the Realistic Preview function is
select (when the realistic preview is not
displayed).
c
“Displaying a preview of the embroidery”
on page 46.
b Memo:
To close the dialog box without applying the
changes to the settings, click Close or
Cancel.
When a realistic
preview is displayed
When a realistic
preview is not
displayed