Filter
Top Products
39
Installation Instructions - EverHot
®
Vertical Discharge Vent System
Figure 32. Illustration Showing the Installation of a Vertical Vent System.
Identify the Vent Location
Determine the location where the roof discharge terminal will be installed. Be sure to take into account
the angle of the roof and cut the hole with a dimension that allows the vertical discharge roof terminal to
be installed.
Cut the Vent to Fit
Figure 33. Illustration Showing How to Cut the Vertical Vent to Fit.
The terminal can be shortened by removing the components A + B + C. Then, both the inside and
outside pipes should be shortened by the same length, X. Re-assemble the terminal by attaching the
components A, B, and C in the correct order. Be sure to tighten component B securely.