Filter
Top Products
Installing the Setback Control
-6-
This section covers the installation of the Setback Control to the Setback Control Junction Box Assembly,
which is mounted to the water heater. The Setback Control Junction Box Assembly was already factory
installed or installed as part of the Performance Package.
Unplug the Water Heater and Setback Control
Step 1: Unplug the water heater and Setback Control. This is shown in Figure 1.
Inspection of Setback Control
Step 2: Remove the Setback Control from its packaging, and inspect it for any damage that occurred
during shipping. This is shown in Figure 2.
Figure 1
Figure 2