Filter
Top Products
Remote Mounting the Setback Control
-19-
Install Setback Control
Step 21: Snap the Setback Control into the Protective Plate. Align the Setback Control to the Protective
Plate, and press until it is fully seated. This is shown in Figure 26.
Figure 26
Install Cover Plate
Step 22: Snap the Setback Cover Plate onto the backplate (located on the Setback Control Junction Box
Assembly). This is shown in Figure 27.
Figure 27
Backplate
Setback Control
Junction Box
Assembly
Cover Plate
Setback
Control
Protective
Plate