Filter
Top Products
Editing the Setback Schedule
-45-
"AM"/"PM" flashes
Figure 92
Figure 91
Edit the Return Period Start Time
Step 16: Press the UP (increase time by 15 minutes) or DOWN (decrease time by 15 minutes) buttons to
edit the time that this period becomes active. The time increments in 15-minute intervals just as it did for
the Wake period. This is shown in Figure 90.
Figure 90
Lock in the Return Period Start Time
Step 17: Press the RIGHT (Next) button to lock in the Return period start time, which is shown in Figure
91.
Edit AM / PM
Step 18: Next, using the UP (index AM / PM) or DOWN (index AM / PM) buttons, select AM / PM, as
shown in Figure 92.
Hour & minutes
digits are flashing