Filter
Top Products
Changing the Batteries
-22-
Removal of Battery Holder
Step 3: Remove the battery holder by depressing its top edge and pulling the holder to the right, as
shown in Figure 31.
Figure 31
Replacement of Batteries
Step 4: Replace the two batteries with (2) AAA batteries. The batteries should be oriented, as shown in
Figure 32.
Figure 32
Re-installation of Battery Holder
Step 5: Replace the battery holder with the new batteries by depressing the top side of the battery holder
and pushing on the right side of the holder. This is shown in Figure 33.
Figure 33
Battery
Holder
Battery
Holder
Top of Setback Control
(seen from back side)