Filter
Top Products
Editing the Setback Schedule
-40-
Figure 75
Day of the week flashes
Figure 77
If the Setback schedule needs to be modified at any point, the instructions in this section can be
followed to edit the previously entered water temperatures and times.
Enter Editing the Schedule Mode
Step 1: From the Home screen, press the RIGHT (Schedule) button, as shown in Figure 75.
Select the Day to Edit
Step 2: Monday is flashing initially. Using the UP (increase day) or DOWN (decrease day) buttons, scroll
until the day that needs to be edited is shown. This is shown in Figure 76.
Lock in the Day to Edit
Step 3: Press the RIGHT (Next) button to edit a particular day water temperatures and times. This is
shown in Figure 77.
Figure 76