Filter
Top Products
CC880/LP880, SC8016 | Operators Guide | 3.0 Codepad Indicators EN | 6
Bosch Security Systems | 6/04 | 920036O.OG.162
Figure 3: CP5 Eight Zone LCD Codepad
Figure 4: Sixteen Zone LCD Codepad
The codepad is the communications interface
between you and your alarm system. Use the
codepad to issue commands. The codepad offers
both visual and audible indications that guide you
through the general operation.
The codepad incorporates numerous indicators.
There are zone indicators that show the condition of
each zone and four other indicators for general
status. The following pages outline a list of situations
and the relevant indicators that are seen.
3.1 Zone Indicators
1 2 3 ….
The zone indicators (1 to 8) display the
status of the zones. Table 2 lists the
various circumstances under which the
indicators display (such as, Zone
Sealed/Zone Unsealed).
Table 2: Zone Indicator
Zone Indicator Definition
On Zone is unsealed
Off Zone is sealed
Flashing Fast
(0.25 sec. on/
0.25 sec. off)
Zone is in alarm condition
Flashing Slow
(1 sec. on/1 sec. off)
Zone is manually isolated or
selected to be isolated
3.2 AWAY Indicator
The AWAY indicator shows the system
is armed in AWAY Mode. The AWAY
indicator also flashes in unison with the
STAY indicator when programming
various options throughout the
Operator’s Manual.
See Section 4.2 Arming in AWAY Mode for
information on the different methods of
arming the system in AWAY Mode.
Table 3: AWAY Indicator
AWAY
Indicator
Definition
On System is armed in AWAY Mode.
Off System is not armed in AWAY Mode.
3.3 STAY Indicator
The STAY indicator displays that the
system is armed in STAY Mode 1 or
STAY Mode 2. The STAY indicator also
flashes in unison with the AWAY
indicator when programming various
options throughout the Operator’s Manual.
See Section 4.3 Arming in STAY Mode 1 for
different methods of arming in STAY
Mode 1. See Section 4.4 Arming in STAY
Mode 2 to arm in STAY Mode 2.
Table 4: STAY Indicator
STAY
Indicator
Definition
On System is armed in STAY Mode 1
or STAY Mode 2.
Off System is not armed in STAY
Mode 1 or STAY Mode 2.
Flashing twice
a second
Zone isolating mode or setting
STAY Mode 2 zones.
Flashing once
every 3 sec.
Day alarm status – day alarm
turned on.