Filter
Top Products
CC880/LP880, SC8016 | Operators Guide | 29.0 Glossary of Terms EN | 21
Bosch Security Systems | 6/04 | 920036O.OG.162
Table 19: continued
Term Description
Phone Controller The phone controller can be used to turn your system on in AWAY Mode via the
telephone by generating a tone.
Sealed Refers to zone status. If a zone is sealed, the detection device is not violated and the
zone indicator does not display on the codepad.
Sensor Watch Sensor watch gives the control panel the ability to recognise that detection devices may
have stopped working or that the view to a PIR detector is blocked (unable to detect any
movement over the duration of the time programmed by your installer).
Silent Alarm Your installer can program zones for silent operation. This means when the zone
programmed for silent operation is violated during the armed period, your alarm system
communicates with the monitoring station without sounding the sirens.
STAY Mode 1 A condition that automatically isolates zones when your system is armed in STAY Mode
1. Only your installer can program zones to be isolated automatically in STAY Mode 1.
STAY Mode 2 A condition that automatically isolates zone when your system is armed in STAY Mode 2.
Only the master code holder can program zones to be isolated automatically in STAY
Mode 2.
Telco Arm Sequence Telco arming is a feature that automatically calls the telephone exchange and diverts your
telephone number to another telephone when the system is armed in AWAY Mode. (In
Australia, this feature is called “Call Forward”.)
Telco Disarm Sequence Telco disarming automatically calls the telephone exchange and does not forward your
telephone number.
Unsealed Refers to zone status. A zone is unsealed when a zone is violated. The corresponding
zone indicator displays on the codepad.
User Code A user code is the personal identification number that the operator uses to arm and
disarm the system.
Zones A monitored input used to trigger an alarm condition when violated.