Filter
Top Products
DINION capture 5000/7000 Configuration | en 51
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
4.6.7 Privacy masking submenu
Selecting an area for privacy masking
To set-up an area for privacy masking, access the area menu by
selecting the Area option from the privacy masking menu. Upon
entering the Area menu, the current area is displayed with the
upper left corner flashing. The flashing corner of the image can
be moved with the Up, Down, Left, Right arrow keys. Pressing
the Select key moves the flashing cursor to the opposite corner,
which can now be moved. Pressing Select again freezes the
area and exits the area menu.
There are four programmable privacy mask areas.
4.6.8 Defaults submenu
Item Selection Description
Pattern Black, Grey,
White, Noise
Selects pattern for all masks.
Mask 1, 2, 3, 4 Four different areas can be masked.
Active On, Off Turns each of the four masks on or off.
Window Submenu Select to open a window in which to
define the mask area.
Item Selection Description
Restore All No, Yes Restores all settings of the six modes
to their default (factory) values. Select
YES then press the Menu/Select
button to restore all values.
When completed the message
RESTORED! is shown.