Filter
Top Products
DINION capture 5000/7000 Configuration | en 45
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
Note:
When VMD is enabled, normal light fluctuations or
environmental factors can contribute to false-positive alarms.
Because of this, it is recommended that you do not connect the
VMD-triggered alarm output of the camera to a monitored alarm
system as the false-positive alarms may be considered a
nuisance.
4.6 Install menu structure
Refer to Section 4.1 Menus, page 28, to access the Install menu.
Item Selection Description
Lens Wizard Submenu Select to optimize the camera-lens
combination backfocus point.
Language Submenu Select on-screen display (OSD)
language
Privacy
masking
Submenu Sets up a masking area
Alarm I/O Submenu Program the alarm input and output
functionality.
Connections Submenu Connection parameters
Test signals Submenu Test patterns and texts
Camera ID Submenu Select to access ID submenu
Defaults Submenu Returns all settings for all modes to
factory defaults