Filter
Top Products
DINION capture 5000/7000 Installing the DINION capture | en 17
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
3 Installing the DINION capture
This section provides instructions for mounting and wiring the
DINION capture.
3.1 Determining the Range
The DINION capture has a recommended operation range with
specified optimal capture distance for each model as shown
below. Installation should aim to control the traffic through one
lane.
Ranges based on capturing:
520 x 115 mm (approximate) license plates on PAL units
(xER-L2Ry-1)
12 x 6 in. (approximate) license plates on NTSC units
(xER-L2Ry-2)
Field of View at Optimal Capture Distance:
License Plate Camera:
2.8 x 2.1 m (PAL units)
6 ft 6 in. x 4 ft 11 in. (NTSC units)
Overview Camera (DINION capture 7000):
Approximately twice the distance of the License Plate Camera.
CAUTION!
The selected mounting location should not place the camera in
a situation where its environmental specifications could be
exceeded.
Ensure the selected location is protected from falling objects,
accidental contact with moving objects, and unintentional
interference from personnel. Follow all applicable building
codes.