Filter
Top Products
Before you clean carpets
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning an
entire room (optional).
3. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
4. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
Carpet cleaning
1. Fill the 2-in-1 water tank. Remove the tank
from the base of the machine by lifting up
the tank carry handle. Carry like a bucket to
the sink.
1a. Unlatch the top of the tank from the
bottom by lifting up on the tank latch which
is located on the back of the tank.
1b. Remove the top of the tank by lifting up on
the handle.
Note how the lip on the top tank separates
from the groove in the bottom tank. This
placement is important when putting the
tank back together.
1c. Fill the heavy duty bladder with clean hand
hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
1d. Leaving the filled bottom of the tank on a flat
surface, only maneuver the top of the tank.
To attach the top part of the tank to the
bottom, carefully hook the lip on the top tank
into the groove on the bottom tank.
1e. Fasten tanks together by securing the latch
in the back.
Note: Remember to secure the tank latch in
the back and test to make sure it is secure
before picking up the tank.
Operation
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition. Please see Stain
Removal instructions on page 16.
B
R
U
S
H
S
U
C
T
IO
N
1
ST
AR
T
HERE
4'
2
3
4
8
7
6
5
9
10
11
12
EXIT
3'
Lip
Groove
(underside of
bottom tank)
1. 1a.
1b. 1c.
1d.
1e.
9
w w w . b i s s e l l . c o m