Filter
Top Products
Maintenance and care
18
w w w . b i s s e l l . c o m
Occasional replacement of one or both belts may
become necessary. If that is needed, please
follow the instructions below.
1. Turn off the machine, and unplug it from
the outlet.
2. Remove both the 2-in-1 water tank and the
formula tank. Set aside.
3. Unscrew the nozzle and remove it. Set aside.
4. Turn the machine on its side. IMPORTANT:
Make sure that the cord side is down.
5. Remove the clear end cap by unscrewing
the 2 black screws. Take care not to drop
the screws into the unit.
6. Remove 1 silver screw.
7. Remove pivot arm by gently lifting up.
8. Remove small brush belt.
9. Replace small brush belt, and reverse steps above.
Brushes can be removed for cleaning or
replacement as needed.
1. Follow small belt removal instructions above.
2. Remove brush rolls by pulling them off of the
metal rods.
3. Place cleaned or new brush rolls back onto the
rods. Make sure one washer is on each end
of the rollers prior to sliding onto the rod. Be
sure to let the rod slide through the bushing to
insure proper fit.
4. Re-attach the long belt on the bottom to the
cogs of the small roller brushes.
5. Place small belt over back roller and metal cog.
6. Place pivot arm in place and screw in place
using the silver screw.
Small belt removal and replacement instructions
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
1. 2. 3.
3a. 4. 5.
6. 7. 8.
9.
Brush removal and large belt replacement instructions
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2. 3. 4.
5. 6.