Filter
Top Products
Carpet cleaning continued
2. Fill the formula tank. Fill up the formula tank
by first unscrewing the cap and insert. Always
use genuine BISSELL formulas to maximize
cleaning and for the safety of your machine.
Fill formula up to the line and replace the cap
and insert. Place formula tank into the slot in
the back of the machine for a snug fit.
3. Set Custom Clean dial. Simply choose one of
the 4 settings (heavy traffic, normal clean, light
clean, or rinse) and the ProHeat 2X will adjust
the right amount of cleaning formula to mix
with the heated water to fit your cleaning need.
4. Set Ready Tools dial to the floor cleaning setting.
5. Plug into a proper outlet and turn the power and
heater switches to the ON (I) position.
Allow one
minute for the built-in heater to warm-up before
cleaning. The ProHeat 2X will be fully warmed and
will provide optimal performance after one minute of
continuous heated cleaning.
6. Cleaning strokes. While pressing the spray
trigger, make one slow forward wet pass and
another one back. Let the built-in heater, formula,
and DirtLifter PowerBrushes do the work for you.
Caution: Do not overwet.
Take care not to run
over loose objects or edges of area rugs. Stalling
the brush may result in premature belt failure.
Note: Your machine is equipped with a
circuit breaker that will automatically shut
off the brush if a large or loose object is
caught in the brush roll. If that happens, be
sure to unplug your machine, remove the
foreign object, and then plug the machine
back in to reset the circuit breaker.
Release the spray trigger and make one
slow forward and backward pass over the
same area to remove any residual dirty
water and aid in drying. Repeat cleaning
passes until water being pulled up appears
clean. Continue passes without pressing the
spray trigger until you can’t see any more
water being pulled up. After cleaning, you
may want to turn the Custom Clean dial to
rinse to give your carpeting a final water
only rinse. This will ensure thorough removal
of embedded dirt loosened by the formula.
BISSELL deep cleaning formulas contain an
anti-resoiling agent that helps your carpets
repel dirt and keeps them looking
good longer.
Operation
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL deep cleaning formulas
intended for use with the deep
cleaner.
Keep plenty of genuine BISSELL deep
cleaning formula and Scotchgard
™
protector cartridges on hand so you can
clean and protect whenever it fits your
schedule. Always use genuine BISSELL
deep cleaning formulas. Non-BISSELL
cleaning formulas may harm the
machine and void the warranty.
OR
F
L
O
O
R
H
O
S
E
C
L
E
A
N
I
N
G
Power Switch Heater Switch
2. 2a.
3.
4. 5.
10
w w w . b i s s e l l . c o m