Filter
Top Products
16
w w w . b i s s e l l . c o m
Stain removal
Do not delay! Attending to an accident soon
after it occurs ensures the most optimal clean.
Leaving it for an extended period of time may
cause it to set and become permanent.
1. Blot up liquids with an absorbent cloth
or paper towels. White materials are
recommended because certain dyes may
bleed and make the stain worse.
2. Gently scrape up any semi-solids with a
spoon or spatula. Do not use a knife or other
utensil with sharp edges because it could
damage the carpet or upholstery.
3. If the area has dried, remove the remaining semi-
solids and residue with a sweeper or vacuum.
4. Be sure to test any spot removal formulas in an
inconspicuous area first. This is important as
some dyes and materials could be damaged
or discoloured by cleaning formulas. If such a
change should occur, try a different formula or
call a professional.
5. Use your Proheat 2X as a precleaner. With one
of the tools attached to the flex hose, set the
Ready Tools dial to the hose attachments setting
and the Ready Tools dial to heavy traffic. Spray
the area with cleaning formula and allow the
BISSELL Deep Cleaning Formula to for penetrate
3-5 minutes.
Note: If cleaning on Berber carpeting, gently run
your machine over a hidden area. If no fuzzing
occurs, continue cleaning in soiled area.
6. Once the precleaning is complete, use the
attached tool to gently scrub the stain with
back and forth strokes.
7. Allow time to dry. Some difficult stains may
require a second treatment.
Maintenance and care
WARNING:
To reduce the risk of
fire and electric
shock due to internal
component damage,
use only BISSELL deep
cleaning formula
intended for use with
the deep cleaner.
Non-BISSELL cleaning
formula may harm the
machine and void the
warranty.