Bissell 9200 Vacuum Cleaner User Manual


 
20
w w w . b i s s e l l . c o m
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday 9 am — 4 pm
BISSELL Homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
For New Zealand inquiries:
Monday - Friday 9 am — 5 pm
Parex Industries Ltd.
103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735
Troubleshooting
Scotchgard protector applicator tool is not spraying
Possible Cause Remedies
1. Cartridge is not connected to the tool 1. Follow instructions on cartridge to
assure proper fit
2. Ready Tools dial on floor setting 2. Set Ready Tools dial to hose
attachments setting
3.
Formula clogging the spray trigger
3. Soak applicator tool only in hand hot
water. Spray without the cartridge
attached to purge any residual
formula left in the applicator tool
Cleaner not picking up solution
Possible Causes Remedies
1. Ready Tools dial may be at wrong setting 1. Set Ready Tools dial to either
floor cleaning or hose
attachments setting
2. 2-in-1 water tank may not be 2. Pick up both the 2-in-1 water
seated properly tank and formula tank and
reseat them so they fit snugly on
the unit
3. 2-in-1 water tank may not be 3. Check to make sure the "lip" of
assembled properly the nozzle is securely hooked
into the groove on bottom of
2-in-1 water tank (see page 9)
4. Formula or 2-in-1 water tank is empty 4. Check water levels in heavy duty
bladder and formula tank
5. 2-in-1 water tank has picked up 5. Empty 2-in-1 water tank. Refill
maximum dirty water and red float heavy duty bladder with clean
door has closed hand hot tap water and replace
6. Red float "door" in the tank may have closed 6. Turn the machine OFF (O),
as a result of bumping an object or moving allowing red float door to release into
machine back and forth too quickly the open position. Turn unit back
ON (I) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.