Filter
Top Products
Machine storage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied, rinsed out, and
dried before the next use. The formula tank
can remain filled and ready to go, or it can
simply be emptied back into the formula bottle
if that is more convenient.
Note: Store cleaner in a protected, dry
area. Since this product uses water, it must
not be stored where there is a danger of
freezing. Freezing will damage internal
components and void the warranty.
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power and heater switches OFF (O).
Unplug the machine and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse
it out at a faucet with running hand hot tap
water, taking care to clean underneath the
heavy duty bladder and all around it.
3. The top half of the tank can be rinsed clean
through the nozzle area. Also, pop out the red
filter underneath the top half of the tank and
rinse that out. Replace before putting the top
and bottom halves of the tank together.
4. Before you place the cleaned 2-in-1 water tank
back onto the machine, simply unscrew the
nozzle using a Phillips head screwdriver .
This can be rinsed out at the faucet. Then
replace back onto the machine by starting
from the bottom of the nozzle and hooking the
tabs into the holes on the bottom sides of the
machine. Secure into place with the screw.
5. The inside of the end caps by the brush rolls
can be wiped out with a clean paper towel,
or, if a more thorough cleaning is desired, the
end caps can be taken off using a Phillips
head screwdriver and rinsed clean.
Replace after cleaning.
6. Any loose hair or debris can be pulled from the
brush rolls and thrown away. For the most
thorough clean before storage, follow directions
on pages 18 & 19 for removal and replacement
of the brush rolls and belts.
Maintenance and care
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Filter
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Tip:
Let all parts dry completely
before storing
3.
12
w w w . b i s s e l l . c o m