Filter
Top Products
WARNING:
To reduce the risk of fire,
electric shock, or injury,
unplug machine from
outlet before servicing.
19
w w w . b i s s e l l . c o m
Troubleshooting
Built-in heater ready light does not illuminate
Possible Cause Remedies
1. The heater switch is not turned ON (I) 1. Turn the heater switch ON (I)
2. The power switch is not turned ON (I) 2. Both switches must be ON (I) to
activate the heater ready light
Reduced spray or no spray
Possible Cause Remedies
1. 2-in-1 water tank may be empty 1. Fill heavy duty bladder with hand hot
tap water
2. Formula tank may be empty 2. Fill formula tank with BISSELL deep
cleaning formula
3. 2-in-1 water tank may not be 3. Turn power switch OFF (O)
seated completely remove and reseat 2-in-1 water tank
4. Pump may have lost prime 4. Turn power switch OFF (O) and
then back
ON (I). Wait one minute,
then depress spray trigger
DirtLifter PowerBrushes do not turn
Possible Cause Remedies
1. The brush is off or broken 1. Turn power switch OFF (O) and
unplug unit from outlet. Follow
instructions on pages 18 and 19
2. The unit is in the upright position 2. Brushes only rotate when unit is
reclined using the detent pedal
3.
Circuit breaker may have tripped
3. Turn the power switch OFF (O) and
unplug from outlet. Check to see if
foreign object is caught in brush roll.
remove object. Plug machine back in
to reset circuit breaker
Maintenance and care
Brush removal and large belt replacement instructions
7. Re-attach clear end cap by tightening with
the (2) black screws.
8. Return nozzle to front of unit, by latching from
underneath and then securing with a screw.
If you have any questions or are having
trouble installing or replacing your belt(s)
or brushes, please call BISSELL Consumer
Services in the UK at 0870.225.0109, in
Australia at 1.800.811.183 or in New Zealand
at 0800.247.735. For all other countries call
our U.S.A. Headquarters at 616.453.4451 or
visit the BISSELL Website: www.bissell.com
7. 8.