Filter
Top Products
Mastering
Your
BERNINA
®
BERNINA
®
Embroidery Module/Machine
MASTERING YOUR BERNINA
®
EMBROIDERY MODULE/MACHINE 2/06
62
Notes
©2006 BERNINA
®
of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Rehooping
artista 630E, 640E, & 730E
Draw a line to represent the design baseline. Hoop fabric in Medium hoop;
use template to keep line straight and centered.
Select London alphabet; enter BERNINA. Go to Edit 2; rotate 90º. Touch OK.
630E/640E: Select Edit 2; move lower edge of text to marked baseline.
730E: Select Move Hoop; position needle over marked baseline.
All: Using the template to keep the line straight, vertical and centered,
embroider BERNINA.
Rehoop fabric. Select London again; enter 630E, 640E, or 730E. Go to
Edit 2; rotate 90º. Touch OK.
630E/640E: Select Edit 2; move lower edge of text to marked baseline.
730E: Select Move Hoop; position needle over marked baseline.
All: Position text an appropriate distance from BERNINA. Embroider, trim,
and mount sample.
deco 330
Draw a baseline. Hoop fabric at
one end; use template to keep line
vertical.
Select Gothic alphabet. Select
vertical lettering. Program
BERNINA; touch OK. Position
needle starting point over
baseline. Embroider.
Rehoop fabric with BERNINA
at top, keeping baseline straight.
Select Alphabet tab. Program
deco 330. Position needle
starting point over baseline at
an appropriate distance from
BERNINA. Embroider.
Return carriage to stored position.
Trim and mount sample.
Embroidery Alphabet
deco 330
Gothic alphabet
aurora 430E & 440QEE
Swiss Block alphabet
artista 630E & 640E
London alphabet
artista 730E
London alphabet
Fabric & Stabilizer
8” x 10” rectangle
aurora 430E & 440QEE
Open a New file. Touch A on the
keyboard. Type BERNINA 430E or
BERNINA 440E; select Swiss
Block , change height to 31.75mm,
click OK. Click on screen to place
lettering. Right click 2 times on the
Rotate CW/CCW icon.
Note that lettering does not fit
within hoop. Select lettering; click
to open Lettering Values box. In
text box, delete A 430E or A 440E,
leaving the letters BERNIN; OK.
Remaining letters fit within hoop.
Draw a line to represent design
baseline. Hoop fabric, using hoop
template to keep line straight and
centered. Embroider BERNIN.
Return to Editor Lite screen.
Select lettering; right click to open
Lettering Values box. In text box,
delete BERNIN and type A 430E
or A 440E; OK. Text fits in hoop.
Rehoop fabric, aligning baseline
and positioning needle an appro-
priate distance from BERNIN.
Embroider, trim, & mount sample.