Filter
Top Products
BERNINA
®
Embroidery Module/Machine
MASTERING YOUR BERNINA
®
EMBROIDERY MODULE/MACHINE 2/06
44
Mastering
Your
BERNINA
®
©2006 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Saving & Deleting Embroidery Motifs
After customizing an embroidery motif or creating a combination that you
want to be able to quickly access and use again, follow these steps.
(For these exercises, use the combination from the previous exercise.)
Notes
aurora 430E & 440QEE
Saving a Motif
Select File > Save As. Save in
desired location (My Designs
folder or other location).
Note: Motifs are accessed
through the Editor Lite software
on your PC.
deco 330
Saving a Motif to Machine
Select Editing tab. Touch Save
File Key. Touch File Name key to
assign file name. Key in file
name. Touch OK; touch OK.
Saving to a
Personal Design Card
Select Editing; touch Save File.
Touch Built in/Card key to toggle
to Personal Design Card. Touch
File Name key to assign file
name. Key in file name. Touch
OK; touch OK.
Deleting a Motif
Select Editing tab. Touch Delete
key symbol (trash can).
Retrieving a Saved Motif
Select Pattern selection tob.
Select Open File key. Touch Built
in/Card key to toggle between
Built in motifs and motifs on the
PDC. Use arrow keys to select
desired motif. Touch OK.
Formatting the
Personal Design Card
(deco 330 only)
Formatting the Personal
Design Card (PDC) enables
designs to be saved and
transferred from the PC to the
deco 330. Note: The deco
330 will only read expanded
(.exp) format designs.
Insert the PDC into the slot
on the side of the deco 330.
Select the Mode key. Select
Set Up and page forward until
“Format Card” appears.
Touch “Format Card”. Note:
All designs previously saved
to PDC will be erased.
If using BERNINA
®
embroi-
dery software, the card will
automatically be formatted
when a design is written to
the PDC, and the design will
automatically be converted to
.exp format. Note: All designs
previously saved to PDC will
remain on the card.